- Check whether the silence affects one channel, every channel, one app or only the soundbar. Each pattern points to a different fix.
- Turn off audio passthrough in the player first when only some channels are silent. It fixes most cases in under a minute.
- Set your streaming device to stereo or PCM output if passthrough is already off. Your TV can decode that format for certain.
- Use your device’s AV sync setting for sound that is always early or late by the same amount, and reload the channel for sound that drifts.
Most IPTV sound problems have nothing to do with the stream being broken. Many live channels send Dolby Digital audio (also called AC3 or E-AC3), and something along the chain from the app to your speakers can’t decode it. That explains the classic pattern: one channel is silent, the next one plays fine. Work through the fixes below in order and stop when the sound comes back.
First, find out which problem you have
| What you notice | Most likely cause | Start with |
|---|---|---|
| Some channels silent, others fine | Dolby audio your TV or soundbar can’t decode | Fix 1, then Fix 2 |
| Every channel silent, menus have sound | Device output format or HDMI setting | Fix 3, then Fix 4 |
| Sound on TV speakers, silent through the soundbar | HDMI ARC limits or the soundbar’s format support | Fix 5 |
| Silent in one app, fine in another | That app’s audio decoder | Fix 6 |
| Lips and voice never match, by the same amount | Processing delay in the TV or soundbar | Fix 7 |
| Sync starts fine and gets worse | The stream or the player’s buffer | Fix 8 |
Fix 1: Pick another audio track
Why it works: some channels carry two audio tracks, for example a Dolby track and a plain stereo one, or English and French. The player may pick the one your setup can’t play.
- Start the silent channel.
- In TiviMate, press OK or the menu button during playback and open the audio track option.
- In IPTV Smarters, tap the screen and choose the audio or track icon.
- Pick a track labelled stereo or AAC if there is one, and test the sound.
Fix 2: Turn off audio passthrough in the player
Why it works: with passthrough on, the app sends the Dolby audio untouched to your TV or soundbar. If that equipment can’t decode it, you get silence. With passthrough off, the app or the device decodes the sound itself and sends plain audio the TV can always play.
- In TiviMate, open Settings, then Playback, and switch Audio passthrough off.
- In IPTV Smarters, open Settings, then the player settings, and switch audio passthrough off.
- In Kodi, open Settings, System, Audio and turn off Allow passthrough.
- Restart the channel.
Worth knowing: with passthrough off, 5.1 surround sound is mixed down to stereo. If you own a surround system that supports Dolby and want it back, fix the format at the device level instead (Fix 3) and leave passthrough on.
Fix 3: Set the streaming device to an output your TV accepts
Why it works: the device itself can be set to send surround formats your TV doesn’t support. Forcing stereo or PCM makes the device convert everything first.
| Device | Where the setting is | Choose |
|---|---|---|
| Fire TV (Fire OS) | Settings, Display & Sounds, Audio, Surround Sound or Dolby Digital Output | Stereo, or turn Dolby Digital Plus off. Labels vary by Fire OS version. |
| Google TV Streamer | Settings, Display & Sound, Audio options, Output format | PCM stereo |
| Chromecast with Google TV | Settings, Display & Sound, Advanced sound settings, Surround sound format selection | Manual, then turn off the formats your TV lacks |
| NVIDIA SHIELD | Settings, Display & Sound, Advanced Settings, Surround sound | Never |
| Apple TV | Settings, Video and Audio, Audio Format, Change Format | Stereo |
Two status screens show what your TV actually accepts. On Fire TV, Display & Sounds has an Audio/Video Diagnostics screen on many models. On SHIELD, go to Settings, About, Status, HDMI, then Audio mode. If Dolby Digital Plus is missing from the list, that is your answer.
Fix 4: Check the TV's own sound settings
Why it works: the TV decides what it passes on to a soundbar or receiver. A setting meant for one setup can mute another.
- Set Samsung TVs to PCM under Settings, All Settings, Sound, Expert Settings, Digital Output Audio Format. Expert Settings also has a Reset Sound option.
- Set the HDMI input audio format to PCM on LG TVs, or Digital Sound Out to Pass Through when a soundbar sits on HDMI ARC. Menu wording changes between webOS versions.
- Turn off volume leveling and dialogue enhancement while you test. Apple and Google both list these as causes of dropouts.
- Turn the TV and soundbar off at the wall for one minute, then on again, so they renegotiate the HDMI audio formats.
Fix 5: Simplify the HDMI chain to the soundbar
Why it works: audio that travels back from the TV to a soundbar over HDMI ARC has a narrow pipe. eARC carries far more, and every extra box in the chain is another place the audio handshake can fail.
| HDMI ARC | HDMI eARC | |
|---|---|---|
| Introduced with | HDMI 1.4 | HDMI 2.1 |
| Audio bandwidth | about 1 Mbps | up to 37 Mbps |
| Formats | Dolby Digital and DTS, plus stereo PCM | Adds uncompressed 5.1 and 7.1, Dolby Atmos and DTS:X |
| Lip-sync correction | Optional, not always effective | Mandatory |
- Use the TV port marked ARC or eARC for the soundbar, and a high-speed HDMI cable.
- Plug the streaming stick straight into the TV or straight into the soundbar’s HDMI input; skip HDMI switches while testing.
- Expect stereo only over an optical cable if your setup uses one; optical can’t carry every surround format.
- Turn HDMI-CEC on at both ends so the TV and soundbar agree on who controls the sound.
Fix 6: Change the decoder or try another player
Why it works: players built on Android’s standard video engine (ExoPlayer) rely on your device’s own decoders. A box without a Dolby decoder can play those channels silently. VLC brings its own decoders, so the same channel often plays with sound there.
- In TiviMate, look under Settings, Playback for the audio decoder option and switch between hardware and software. Option names have changed between versions.
- In IPTV Smarters on Android or Fire TV, add VLC under Settings, External Players, then set it for live TV under Player Selection.
- Test the same channel in VLC. If it has sound there, the problem is the first player’s decoder, not your TV.
Fix 7: Sound always early or late? Use AV sync
Why it works: TVs and soundbars process picture and sound at different speeds. When the gap is the same on every channel, a delay setting closes it for good.
- Run AV Sync Tuning on Fire TV under Settings, Display & Sounds, Audio. A ball bounces with a flash and a tone; move the slider right if the tone plays before the flash, left if after, then press Select. Some Fire TV smart TVs and home theatre setups call it Lip Sync Tuning, or don’t have it.
- Use Digital Output Audio Delay under Expert Settings on a Samsung TV. Move it right if the sound comes before the picture.
- Use AV Sync Adjustment under Sound, Additional Settings on an LG TV.
- Run Wireless Audio Sync on Apple TV, under Video and Audio, Calibration, with your iPhone.
- Use the TV or soundbar delay setting with a Google TV Streamer. Google says the device has no offset setting of its own.
- Set an audio offset per channel in Kodi (playback settings, Audio settings) or in VLC (Tools, Track Synchronisation).
Fix 8: Sync that drifts during the show
Why it works: sync that starts fine and slips over twenty minutes usually comes from the stream or the buffer, not your hardware. A fresh start realigns the two.
- Leave the channel and come back, or reload it from the guide. This realigns sound and picture on most players.
- Raise the buffer size in TiviMate (Settings, Playback) one step if drift comes with stutters.
- Turn off motion smoothing on the TV, or switch to Game mode, which cuts video processing delay.
- Note the channel and the time and send them to us. One channel drifting while others stay in sync points to the source.
Common problems
Sound cuts out for a second every few minutes
This is usually the TV and soundbar renegotiating the audio format over HDMI. Set the streaming device to a fixed format (Fix 3) instead of automatic, and check that HDMI-CEC is on at both ends.
Sound works on the TV speakers but not the soundbar
The soundbar is receiving a format it can’t play, often through plain ARC. Set the TV’s digital output to PCM (Fix 4) or connect the stick to the soundbar’s HDMI input.
Only French channels or only sports channels are silent
Those groups often use Dolby audio. Turning off passthrough (Fix 2) or picking the stereo track (Fix 1) normally fixes the whole group at once.
Everything was fine until an app update
Updates sometimes reset audio settings. Recheck passthrough and the decoder option in the player, then the device’s surround setting.
No sound in any app, even the home screen
That is a device or TV problem, not IPTV. Check the volume and the TV’s audio output source, then restart the device.
What these fixes can't solve
- Expect no sound fix in settings if the channel itself goes out without audio. Tell us which one and we check the source.
- Accept stereo on cheaper sticks and older TVs that can’t decode surround formats; there is no setting that adds a missing decoder.
- Keep in mind that sync settings apply to every channel, so a single badly synced channel needs a source fix, not a TV setting.
- Check the volume and mute settings on the TV first if every app is silent, because no player setting changes those.
IPTV sound problems: common questions
Why do some IPTV channels have no sound?
Usually because those channels send Dolby Digital (AC3 or E-AC3) audio that your TV or soundbar can't decode, or that the player has no decoder for. Turning off audio passthrough in the player, or choosing the stereo audio track, fixes most cases.
Should audio passthrough be on or off?
Off, unless you have a soundbar or receiver that supports Dolby and want surround sound. With passthrough off, the app decodes the audio and sends stereo the TV can always play.
How do I fix IPTV audio out of sync on a Firestick?
Open Settings, Display & Sounds, Audio, AV Sync Tuning. Watch the bouncing ball, move the slider right if the tone comes before the flash and left if after, then press Select.
Why does IPTV have sound in VLC but not in TiviMate?
VLC uses its own audio decoders, while many Android players rely on the device's decoders. If your device lacks a Dolby decoder, VLC can play what the other app can't. Try the software audio decoder option in TiviMate or use VLC as an external player.
Can my internet cause sound problems?
Rarely on its own. A slow connection causes buffering and frozen pictures, which can throw sync off briefly. Constant silence or a constant delay comes from audio formats and settings, not speed.
Do I lose surround sound if I switch to stereo?
Yes. Stereo or PCM output mixes 5.1 sound down to two channels. If you have a surround system, try a setup that passes Dolby through to it instead, such as connecting the stick to the soundbar's HDMI input.
Next steps
- Start the 24-hour free trial to test sound on your own setup.
- Browse every device guide in the setup hub.
- Fix a frozen or stuttering picture with the buffering guide.
- Work through other faults in IPTV not working.
- Fill an empty guide with the EPG guide.
Disclosure: we run BuyIPTV.ca, an IPTV service for Canadian households. Menu paths were checked against Amazon, Google, NVIDIA, Apple, Samsung and LG support pages and the Kodi and VideoLAN documentation in November 2026. TiviMate and IPTV Smarters publish no official manuals, so their menu names can differ slightly by version.
